DISCLAIMER: This guide assumes a basic knowledge of Putty and Linux and comfortable in dealing with command line commands. We are not responsible for any loss for using this guide without the pre-requisite knowledge. Do not proceed with this guide if you have any doubts and turn to a masternode provider.
List of masternode Providers (arranged in alphabetical order)
These providers have informed us that they are hosting Firo masternode hosting services. These are recommended if you don’t have the technical expertise to follow these instructions.
We do not endorse or recommend any particular masternode provider (even those run by team members) and none of these are affiliated to Firo in anyway.
Do your own due diligence when picking them. Some masternode providers may be run by team members in their own personal capacity but shall not be considered an official Firo provider. We will delist providers that are reported as scams or have acted irresponsibly but hold no responsibility for having them listed in this list as it is impossible for us to police.
You should only need to provide your address that you collateraled your FIRO in or the transaction ID. You should NEVER need to collateral 1000 FIRO to them or to an address outside your PC/mac wallet or to give any of your private keys (that is obtained via dumpprivkey). Here’s an alphabetical list:
Disclosure: Some of these links contain referral links whereby we may receive compensation when you sign-up or use their products/services. These do not constitute an endorsement of the product/service.
- HostingKing by perrykmm#2742 (Discord)
- Masternodes Germany
- Masternodehosting (by Flare)
- PDABase (small provider by Reuben and his friend Hui Sing to cater to mainly friends)
- Satang Nodes
Whether you are hosting with a masternode provider or doing it on your own, ensure you have the latest Firo wallet and you have already obtained your 1000 FIRO (preferably just a bit more to cover fees when you’re transferring around). Steps 1 and 2 are still required even if you are going for a masternode provider.
Step 1: Encrypt and Backup your wallet on your Desktop wallet
If you haven’t done so already, make sure you encrypt your wallet on your local desktop wallet (PC/Mac/Linux).
Go to Settings > Encrypt Wallet.
After you have encrypted your wallet, it is also recommended to do a backup via File > Backup Wallet. It is recommended to store this wallet on a separate physical drive or pen drive. The wallet.dat is encrypted so even if the wallet.dat is exposed, if your password is long enough, it will be secure.
Please don’t forget your password! No one can help you if you lose your password.
Step 2: collateral your 1000 FIRO on your Desktop wallet
Your collateral address is where you will be storing your 1000 FIRO.
You can create the collateral address in two ways: using the Receive tab, OR in the Debug Window
Click on the Receive tab. Enter a label for your collateral address in the Label field and click on Request Payment. A window should pop up with a Firo address.
Go to Help > Debug Window > Console and type in
In one single transaction, send exactly 1000 FIRO into the masternode collateral address that you created. Do not send 500 and then another 500. It has to be in one single transaction. Do not tick subtract fee from amount.
It is not recommended to send it direct from an exchange as they might deduct certain withdrawal fees resulting in less than 1000 FIRO in that transfer.
Wait 1 confirmation for this transaction to be valid as your masternode collateral. When done correctly, the transaction id and transaction index will appear when you execute this command in the Debug Console:
Special Notes only for those who are creating more than one masternode:
If you are doing more than one masternode, special care is required to ensure that you are creating collaterals properly. You do not want to break the previous 1000 FIRO collateral you just made by taking funds from that collateral.
To do this, on your local desktop wallet turn on coin control by going to Settings > Options > Wallet and click on Enable coin control features. This will enable control of which funds you are using when making your next 1000 FIRO collateral.
Then go to your Send tab, and you will see Coin Control Features. Click on Inputs. You should see your 1000 FIRO collateral there. Right click and click Lock Unspent. This means that when making your new collateral, your wallet will not touch these funds.
Once you have done this, you can make the next 1000 FIRO collateral for your next masternode. Repeat this everytime you have made a new masternode.
You can always verify you’re doing this correctly by going into Help > Debug Window and typing evoznode outputs which would display all masternode capable collaterals.
Step 3: Creating ownerAddress, payoutAddress, feeSourceAddress and operatorKey/operatorPubKey
a, b, and c can be generated through Receive tab or the Debug Window, just like the collateral address above.
Proof that you own the masternode. Must be in the same wallet as collateral. DO NOT USE THE COLLATERAL ADDRESS AS OWNER ADDRESS.
DO NOT SEND COINS TO THE OWNER ADDRESS. DO NOT USE IT AS PAYOUT ADDRESS. DO NOT USE THIS ADDRESS FOR ANY OTHER PURPOSE.
Address the masternode will pay out to. Can be inside the same wallet or an external address.
An address with funds to pay the transaction fee for registering your masternode. To get a list of addresses with funds, enter the following command in the Debug Window:
If you do not have any, you can create an address and send some Firos there. You can then use the address as feeSourceAddress.
In Debug Console, enter bls generate. The output will be similar to this:
secret: This is your operatorKey (for protx) and also the znodeblsprivkey for use in Step 6.
public: This is your operatorPubKey (for protx)
You cannot regenerate the same pair of keys, but you can generate the public key from the secret key if you lose the public key.
Step 4: Get a VPS
There are many providers to choose out there.
Select a VPS package that meets the minimum requirements:
- 1.5 GB of RAM (2 GB with swap on recommended)
- 25 GB of disk space (blockchain size is currently 5.3GB in May 2023)
Note: With FiroPoW, the blockchain grows at a rate of about 1 GB per year. Please make sure you pick a VPS with sufficient disk space.
When choosing a server, please remember reliability is more important than price. If your masternode goes offline, you will potentially miss out on payouts which would be more than your VPS cost.
Pick Ubuntu 20.04 64-bit and install it.
Once it is done, the VPS provider should give you a username (usually root) and a password. Use a SSH client like Putty or if the VPS provider provides, it open up a console window.
Step 5: Configuring Your VPS
Creating a New User
It is always good practice to create a new user to run the masternode so that the masternode application does not run with root access.
On your newly created VPS, Login as root.
Create a new user with the following command, replacing
You will be prompted for a password. Enter and confirm using a new password (different to your root password) and store it in a safe place.
You will also see prompts for user information, but this can be left blank.
Once the user has been created, we will add them to the sudo group so they can perform commands as root. Only commands/applications run with sudo will run with root privileges, while others will run with regular privileges
usermod -aG sudo <username>
Now, while still as root, we will update the system from the Ubuntu package repository.
Installing a Firewall
We are installing UFW (uncomplicated firewall) to further secure your VPS server. This is optional but highly recommended.
While still in root user on your VPS (or alternatively you can sudo within your newly created user).
apt install ufw
(press Y and Enter to confirm)
The next step opens port 8168 which is required for your masternode to communicate.
ufw allow ssh/tcp
ufw limit ssh/tcp
ufw allow 8168/tcp
ufw logging on
(press Y and Enter to confirm) You now have a firewall setup!
Allocating a Swap File
You can skip this step if your VPS provider has automatically allocated swap for you. Use the free command to check if swap exists.
fallocate -l 4G /swapfile
chmod 600 /swapfile
Add the following line at the end of the file (press tab to separate each word/number
/swapfile none swap sw 0 0
then press Ctrl + X to close the editor, then Y and Enter save the file. Then reboot the server.
Your VPS is now ready for operation.
Step 6: Installing Firo in your VPS
After logging into the new user on your VPS you created in Step 5, type the following to download the latest Firo Linux package.
tar xzvf firo-0.14.13.2-linux64.tar.gz
Create a new config file for your masternode. Type
This will create a new directory and also open up a new text file called firo.conf in a text editor called nano.
In that new file type the following and change the capitalized parts to match your actual details. The rpc username and password can be anything you wish (try to make it longer a bit).
externalip=YOUR MASTERNODE IP:8168
znodeblsprivkey=YOUR SECRET OUTPUT FROM STEP 3 HERE
Press Ctrl-X to save and press Y to confirm it.
Type following commands to start your firod daemon and let it sync. This will take a few hours.
You can always check the status of syncing by typing
and compare the blocks number with our Block Explorer. Once it has synced, it’s now time to start your masternode.
Step 7: Registering your masternode
The registration process must be done on your local wallet, not on your VPS/masternode
Once you have done all the above, you can now register your masternode with the following command:
protx register collateralHash collateralIndex ipAndPort ownerAddress operatorPubKey votingAddress operatorReward payoutAddress feeSourceAddress
collateralHash: transaction ID of your 1000 FIRO collateral (from "evoznode outputs")
collateralIndex: transaction index of your 1000 FIRO collateral (from "evoznode outputs")
ipAndPort: the IP address and port of your masternode
ownerAddress: the ownerAddress, generated in Step 3
operatorPubKey: the "public" part of the "bls generate" output, generated in Step 3
votingAddress: "" (defaults to ownerAddress)
payoutAddress: A valid Firo address for your masternode payouts, generated in Step 3
feeSourceAddress: A valid Firo address with funds in it to fund the masternode registration, from Step 3
Before you are able to enter the command, you must first unlock your wallet:
walletpassphrase YOURPASSWORD 60
This command will unlock your wallet for 60 seconds and returns a (null) message when successfully executed.
If everything is correct, you should get a transaction ID.
protx register 4950f88867b69760d3cd7c1f53531340f6723eb8f7d7f00730abfa12c5fe10e0 0 18.104.22.168:8168 TRVDAxJwaZYFfmti4aTeKCByz1jbMq8Jy4 995b3e1e2a65ce960a8cc7d305c5914b7f60e888c338c1f3317efbdcac58e82ecc110315ce03f49d9d387ff35c2796ad "" 0 TEZ8M8Fgp8h4HvUjXtjz3krYraRtySiXdw TQGmCxUQHK2xKGYNyeqGdSYQqfEAB2hjtd`
Registration is successful once the transaction containing your registration is mined and is included in a block. To check, copy the transaction ID and enter it here: explorer.firo.org
Once the transaction is mined, the nodes you just registered should appear in the masternodes tab in the wallet.
Do not skip this step. To check your masternode’s status on the masternode itself, do ./firo-cli evoznode status. If everything was setup correctly, you should see your masternode’s details along with these two lines at the bottom:
Unbanning your masternode
The ubanning process must be done on your local wallet, not on your VPS/masternode
Your masternode is banned if it has the POSE_BANNED status. You can unban your masternode by entering this command in your local wallet’s Debug Console:
protx update_service proTxHash ipAndPort operatorKey operatorPayoutAddress feeSourceAddress
proTxHash: the proTxHash of your masternode. In the Masternodes tab on your local wallet, right-click on the banned node and choose 'Copy Protx hash'
ipAndPort: ipAndPort of banned masternode
operatorKey: znodeblsprivkey of the masternode, usually inside firo.conf on the masternode. This is different than the operatorPubKey!
operatorPayoutAddress: "" , if you set your operatorReward to 0 during registration
feeSourceAddress: an address in the local wallet that has FIRO to fund the transaction. Can be obtained with the listaddressbalances command
Please ensure that you have fixed the problem that caused the ban before unbanning your masternode otherwise it will get banned again. A more detailed guide is here.
After unbanning, ensure that you check the status of the masternode in both the wallet and the masternode itself.
The following tips are not covered by this guide but can ensure smoother running of your masternode.
- Ensure that your masternode is automatically started after a VPS reboot using monit or systemd
- Set Ubuntu to automatically download and install new upgrades
- Further secure your masternode by modifying the SSH configuration file and/or install and configure fail2ban
- Prevent the debug.log from getting too big by rotating it